System Administration
PVTis16S3IM
60
Disable Music on Hold/Background Music
Use the command
TDLIB /TH-
to stop the BGM and MOH output.
NOTE:
It is important to stop the
BGM/MOH output before changing the file(s). Failure to do so may cause the system to become
unstable and halt operation.
Music on Hold:
At the DOS prompt, type:
DEL D:\MESG\MOH.RMS
Background Music:
At the DOS prompt, type:
DEL D:\MESG\BGM.RMS
Perform a warm boot or use
TDLIB /TH
to re-start the BGM and MOH output..
Customizing Music on Hold/Background Music
If you would like to use your own custom recording for music on hold, please contact technical support for
help with conversion into the proper format for Tis16S3. Please be sure to let them know which hardware
version you have. If you are not sure which version of hardware you have, technical support will be able to
assist you.
Changing the File After the System has Started
To change the file
after
the system has started, use the following procedure:
Use the command
TDLIB /TH-
to stop the BGM and MOH output.
NOTE:
It is important to
stop the BGM/MOH output before changing the file(s). Failure to do so may cause the system to
become unstable and halt operation.
Copy the new file to the proper location given above.
Use
TDLIB /TH
to re-start the BGM and MOH output.
I&M
?
Summary of Contents for Perfect Voice Tis 16
