Teleco Perfect Voice Tis 16, Installation Manual

Page: 16 / 101

Installation
PVTis16S3IM
10
Program 580: Voice Mail Port Data
01 Control Method Select In-band
02 Send A/D Tone Enable
03 Send B Tone B Tone and Extension Number
04 End-to-End Enable
07 VM to VM Call Blocking
Blocking
(If you experience problems with integration on Busy and DND calls, you may need
to set this to Non Blocking .)
1 .
Programs 200:15 (for voice mail ports), 200:22 (for station ports), 209:02, 209:04, 579:10, and 579:16 should all use the
same Pilot Number.
2. The number the Voice Mail looks for can be changed in IBS Settings in the Admin program.
3. The number the Voice Mail looks for can be changed in Screens (System » Integration)
4 . The number the Voice Mail looks for can be changed in Screens (Receptionist » Instance Setup » System Access Code)
5 . Integration can be whatever you want; the “standard” is to use 7E in parameter #185, and 8E in parameters #186 and
#188.
6. If using a Dedicated Notify Port that is not part of the VM Hunt Group (program 209 and 218) then set to Auto and
Access Code Cancel. If you do not want to have the MWI automatically extinguished on access and you are having
problems with the MWI, then include the Dedicated Notify Port in the VM Hunt Group and set call blocking on for that
station port.
Part II (b) – System Programming for SMDI (Programs 579, 580, 804, 803)
N o t e
The slot occupied by PV Tis16 Series3 should be programmed as a BSLU/BSLS card.
Program 579: System Voice Mail Data
01 DID/DNIS VMID Option DN VMID
02 Cancellation Method for VM MW Auto and Access Code Cancel
03 Message Desk Number Enable
04 Output of CLASS/ANI and DNIS Enable
05 Calling Number Digits Sent to VM Enable
07 Auto Cancel of VM and MW Enable
09 LCD Control of Voice Mail Enable
(Must be enabled to allow CTX Call Record feature)
10 Central VM Callback
Enter Pilot DN
(
Programs 200:15 (for voice mail ports), 200:22 (for station ports), 209:02, 209:04,
579:10, and 579:16 should all use the same Pilot Number.)
16 Transfer Direct to VM DN
Enter Pilot DN
(
Programs 200:15 (for voice mail ports), 200:22 (for station ports), 209:02, 209:04,
579:10, and 579:16 should all use the same Pilot Number.)
17 Length of VM ID 10
Program 580: Voice Mail Port Data
01 Control Method Select SMDI
02 Send A/D Tone Enable
04 End-to-End Enable
07 VM to VM Call Blocking
Blocking
(If you experience problems with integration on Busy and DND calls, you may
need to set this to
Non Blocking .)
I&M
?