Teleco Perfect Voice Tis 16, Installation Manual

Page: 14 / 101

Installation
PVTis16S3IM
8
Battery
C A U T I O N – B a t t e r y R e p l a c e m e n t
The Tis16S3 battery can ONLY be replaced with a 3 volt Lithium coin battery,
number CR2032 . There is a risk of explosion if the incorrect battery is used. Dispose
of used battery according to the battery manufacturer’s instructions.
Step 2: Install BSIS Card if using SMDI Integration on Strata CIX
N o t e
A BSIS card must be installed in the Strata CIX if using SMDI Integration.
Install and program serial card BSIS in the Strata CIX. The serial cable will be used to connect the BSIS
card to the Pinnacle Tis16S3.
Step 3: Program Telephone System
The telephone system programming should be completed in two stages. In the first stage, the extensions for
the Perfect Voice Tis16S3
are programmed. The second stage of changes is not performed until the Perfect
Voice Tis16S3 has been fully programmed and all training is complete. This stage, often referred to as the
cutover, is where you actually route and forward calls to the Perfect Voice Tis16S3 .
Programming Toshiba Strata CIX Telephone Systems
ƒ
Part I – Station Programming (Programs 200, 209, 218)
ƒ
Part II (a) – System Programming for IBS (Programs 579, 580)
ƒ
Part II (b) – System Programming for SMDI (Programs 579, 580, 804, 803)
Part I – Station Programming (Programs 200, 209, 218)
Program 200: Station Data Assignment
Setting for Voice Mail Ports
1
Setting for Station Ports
02 Station Type SLT DKT
03 Circuit Type Voice mail Extension
15 Display DN Enter Pilot DN for the VM Hunt Group
2
Set to match station Prime DN
19 VMID Code Leave this field Blank; do not enter anything! Set to match station Prime DN
22 MW to VM Port Leave this field Blank; do not enter anything! Enter Pilot DN for the VM Hunt Group
2
23 Mailbox Selection Select between Auto Input and Manual Input for Voice Mail Call record.
I&M
?