Teleco Perfect Voice Tis 16, Installation Manual

Page: 71 / 101

Remote Diagnostics/Administration
PVTis16S3IM
A - 5
File Transfers
Two programs that use the ZMODEM file transfer protocol are supplied with Perfect Voice Tis16S3 to
enable the transfer of files between the local PC and remote Perfect Voice Tis16S3 system.
ZSEND Initiate a ZMODEM file transfer to send a file from the Perfect Voice Tis16S3
system to the local PC.
ZRCV Initiate a ZMODEM file transfer to receive a file from the local PC to the
Perfect Voice Tis16S3 system.
To transfer a file, run the appropriate program by keying in the command from the Perfect Voice Tis16S3
system DOS system prompt, supplying the name of the file to send/receive as the only command line
argument. After keying in the “Z...” command on the Perfect Voice Tis16S3 system, initiate the
download/upload procedure in the communications software on the local PC.
Resetting or Initializing the Internal Modem on the Perfect Voice Tis16S3
To reset or initialize a modem on the Perfect Voice Tis16S3, first dial the system. From the list below, dial
the appropriate code, followed by the confirmation code (the codes are the same). You will hear "Please
wait.... beep..beep..beep" followed by the Whattodo. Hang up at this time.
Code Modem Confirmation Code
970 Local Connection on COM 2 at 9600 970
971 Local Connection on COM 2 at 57600 971
972 Hayes 14400 fixed – internal modem (COM 3) 972
973 Local Connection on COM 2 at 19200 973
974 Local Connection on COM 2 at 38400 974
975 Local Connection on COM 2 at 115000 975
976 Hayes modem on COM 2 at 9600 976
977 Not used Not used
978 Start SMDI on COM 1
NOTE: Perfect Voice Tis16S3 reboots after selecting
this option.
978
NOTE: After entering the
confirmation code, you will
hear beeps. You must hang up
when you hear the beeps or the
process will not be completed.
979 Disable SMDI
NOTE: Perfect Voice Tis16S3 reboots after selecting
this option.
979
NOTE: After entering the
confirmation code, you will
hear beeps. You must hang up
when you hear the beeps or the
process will not be completed.
I&M
?