Teleco Perfect Voice Tis 16, Installation Manual

Page: 22 / 101

Installation
PVTis16S3IM
16
C. Selecting a Pre-configured Dialplan
It is important to pay close attention when selecting a dialplan. Be absolutely certain of the dialplan you
want before you begin this step. It is strongly recommended to use the 2 digit or 3 digit pre-configured
dialplans on all Toshiba telephone systems as they have been tailored for these systems. Table B illustrates
the dialplans available. You may select a pre-configured dialplan via the telephone, Admin Graphical
Manager, or SCREENS interface. If you wish to create a custom dialplan or add to the current dialplan,
refer to “Appendix B: Create a Custom Dial Plan”.
NOTE : Once you have selected a pre-configured dialplan, it is not possible to select a different pre-
configured dialplan without accessing the User Directory in the SCREENS interface and pressing F7 to
delete the range of Users that have already been created. All local configuration information, personal
greetings, names, and messages will be lost. Single Digit Users may be configured as audiotext or
additional Audiotext Users may be added using Appendix C.
Table B
Option
Number
Confirmation
Code
Dialplan Description Normal Users Outside Users
1 1001 2 – digit 10-59 600 – 649
2 2002 3 – digit 100-199 600 – 649
3 3003 3 – digit 200-299 600 – 649
4 4004 3 – digit 300-399 600 – 649
6 6006 2 – digit with SMDI 10 – 59 600 – 649
7 7007 3 – digit with SMDI 100 –199 600 – 649
8 8008 3 – digit with SMDI 200 - 299 600 – 649
9 9009 3 – digit with SMDI 300 - 399 600 – 649
Enter the appropriate confirmation code from Table B.
Press # when finished.
“Please wait.” (Then you hear several tones)
You are placed at the main greeting. Hang up.
Press Intercom and call Tis16S3.
Enter the pre-configured dialplan Option Number from
Table B.
Dial 912
(NOTE: If the telephone system has been programmed,
press ** to cancel auto-login before dialing 912.)
NOTE:
Changes will not become active until the next call into the system. Please hang up and call back
into the system to verify changes.
I&M
?