Teleco Perfect Voice Tis 16, Installation Manual

Page: 72 / 101

Remote Diagnostics/Administration
PVTis16S3IM
A-6
Connecting Locally via Console Port
When the Perfect Voice Tis16S3 boots, by default, the internal modem is initialized and the CONSOLE port
(COM 2) is active and set at 57600 baud.
Local programming and maintenance can be accomplished by connecting a laptop/PC to the CONSOLE
PORT (COM 2) of the voice mail system and typing in HELLO.
N O T E
Typing HELLO puts the Scheduler on HOLD until you type BYE. (The Scheduler is
disabled while online so the system will work in conjunction with AGM.) Scheduled
events will NOT run as long as you are in the “Hello” mode.
Be sure that you type
BYE when you have finished programming/maintenance.
The basic materials required for the local connection are a laptop/PC and a standard 9 to 9 null modem
cable.
NOTE: You cannot use the CONSOLE PORT (COM 2) and modem (COM 3) for Klinic/Admin
connection at the same time.
Local Connection Diagram
The system is equipped with a serial port to act as the programming port when the SCREENS programming
interface is required. When the system is booted-up, it will be configured for a modem connection at
9600bps/None/8/1. In order to connect a device such as a laptop or PC equivalent, communication software
with the settings of 9600bps/None/8/1 is required with a null modem cable to serve as the link between the
two machines. A straight through cable with a null modem adapter can serve as a substitute if a null modem
cable cannot be obtained.
Voice Mail
(COM 2)
Start on
Console port
Null modem cable
Serial port with
communications
software
The serial port is a standard 9 pin male RS232 connection therefore requires the null modem cable to be a
9pin female. The other end of the cable depends on the serial port of the programming terminal (most serial
ports equipped on personal computers are 9 pin males). If a custom cable is required or cross connections
must be used please refer to the following diagram for assembly instructions.
8 1 7
2 3
3 2
4 6
5 5
6 4
7 1
8 1
9 9
&
Null Modem Pinout DB9 to DB9
(female to female)
I&M
?