Tektronix DG2020A, User Manual

Page: 149 / 258

EDIT Menu
3Ć48
DG2020A, P3410, & P3420 User Manual
Table 3Ć12: Logical operation parameters
Parameter Function
Src 1 Bit Specifies a bit that will be used as an operand to the operation.
Src 2 Bit Specifies the other bit that will be used as the other operand to the
operation.
Operation Specifies the type of the operation.
Selection Item Description
AND Logical AND
OR Logical OR
NAND Logical NAND
NOR Logical NOR
EXOR Logical exclusive OR
EXNOR Logical exclusive NOR
Dest Bit The bit to which the result pattern is written
From When Entered was selected in the Region side menu item, specifies
the first point in the bit from which the pattern is written.
Size When Entered was selected in the Region side menu item, specifies
the number of points in the bit in which the pattern is written. The
Maximum 9999 points can be entered. Entering 0 causes to quit the
popup menu.
Operation.
Apply a logical operation to two data items
Bottom button Popup menu Side button
Enhanced Action Logical Operation OK
Region (Select All or
Entered.)
Set the parameters in the popup menu.
(Src 1 Bit, Src 2 Bit, Operation, Dest Bit, From, Size)
OK