Tektronix DG2020A, User Manual

Page: 72 / 258

Operating Examples
DG2020A, P3410, & P3420 User Manual
2Ć37
Equipment Connections
Connect the DG2020A data generator to either a P3410 or a P3420 pod using a
pod connection cable as shown in Figure 2-24.
Figure 2Ć24: Pod connection
Note that the connectors on the DG2020A rear panel are installed with the tab
slot down, and the connector on the pod rear panel is installed with the tab slot
up (see Figure 2-25).
To connect a cable between the DG2020A and a pod, align the yellow wire end
of the cable connector with the triangular yellow index mark on the DG2020A or
pod connector. Doing this also correctly aligns the connector alignment tab. See
Figure 1-2. Then carefully but firmly insert the cable connector into the
DG2020A or pod connector.