manualshive.com logo in svg

Tektronix DG2020A, User Manual

Share
Download
Tektronix DG2020A User Manual Download Page 17

General Safety Summary

 xii

DG2020A, P3410, & P3420 User Manual

Terms in this Manual.

 These terms may appear in this manual:

 Warning statements identify conditions or practices that could result

in injury or loss of life.

 

 Caution statements identify conditions or practices that could result in

damage to this product or other property.

Terms on the Product.

 These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you read the
marking.

WARNING indicates an injury hazard not immediately accessible as you read the
marking.

CAUTION indicates a hazard to property including the product.

Symbols on the Product.

 The following symbols may appear on the product:

 

! ##% ! $

!# !

! # $

 $

"$#

   #

Symbols and Terms

Summary of Contents for DG2020A



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands