Tektronix DG2020A, User Manual

Page: 24 / 258

Getting Started
DG2020A, P3410, & P3420 User Manual
1Ć3
Options
This section describes the options, and standard and optional accessories
available for the DG2020A.
The following options are available.
Option 01 (24-channel output)
Option 02 (36-channel output)
Option 1R (rack mounting)
Each of these options will be discussed in detail in the following paragraphs.
This option adds a 12 bit digital port for a total of 24 channels. This option
allows 2 individual pods to be used at the same time. Pod cable connections are
located on the rear panel. Although pod cables are included with this option, the
additional pod is not included. The P3410 or P3420 pod must be ordered
separately. Contact your Tektronix sales representative if you intend to add this
option to a DG2020A that you are already using.
This option adds two 12 bit digital ports for a total of 36 channels. This option
allows 3 individual pods to be used at the same time. Pod cable connections are
located on the rear panel. Although pod cables are included with this option, the
additional pods are not included. Thus P3410 and/or P3420 pods must be
ordered separately. Contact your Tektronix sales representative if you intend to
add this option to a DG2020A that you are already using.
When option 1R is specified, the DG2020A is shipped configured for mounting
in a 19 inch rack. The floppy disk drive is moved so that it can be accessed from
the front panel in this instrument. Refer to Table 1-4 for the rack mount part
number. Contact your Tektronix sales representative for details on converting a
non-rack mounting DG2020A to rack mounting.
See the Instruction Sheet provided with the rack mounting kit for details on the
rack mounting adapter.
Power Cord Options
Table 1-1 lists the power cords available with the DG2020A.
Option 01 (24ĆChannel
Output)
Option 02 (36ĆChannel
Output)
Option 1R (Rack Mount)