Tektronix DG2020A, User Manual

Page: 83 / 258

Operating Examples
2Ć48
DG2020A, P3410, & P3420 User Manual
3. Allocate data bits to pod channels A-00 to A-11.
a. Clear the pod channel for channels A-00 to A-03.
Menu button Bottom button Popup menu Side button
Front panel
button
Pod Assign
Press the front panel up arrow button to select channel AĆ00 from the POD assignment
list.
Release
Clear the AĆ01 to AĆ03 allocations in the same manner.
b. Allocate the IC1 group data to the pod channels A-04 to A-07 and turn
off the output impedance control for each channel.
Menu button Bottom button Popup menu Side button
Front panel
button
Press the front panel down arrow button to select channel AĆ04 from the POD
assignment list.
Select data D03 (IC1:03) from the Data bits list using the general purpose knob.
Assign
Change Inhibit
Control
Select OFF. OK
Allocate D02 to D00 to AĆ05 to AĆ07 using the same procedure and turn off the output
impedance control for each channel.
OK
. Press the OK button when done to activate the allocations. Note that the
allocations will not become valid unless the OK button is pressed.
c. Allocate the IC2 group data to the pod channels A-08 to A-11 and turn
off the output impedance control for each channel.
Allocating Data Bits to the
Pod Channels