Tektronix DG2020A, User Manual

Page: 171 / 258

SETUP Menu
3Ć70
DG2020A, P3410, & P3420 User Manual
Operation:
Set the high-impedance control method
Bottom button Popup menu Side button
""
# # # "# $ ! ) #! &# # $ & !!& $##"
# )
#!
# #! '#! , ! #
Level/Delay Menu
This menu sets the pod output voltage and delay, and whether or not output is
disabled in the output stopped state.
. Certain of these parameters cannot be changed for the P3410 (TTL level
output) pod. When that pod is being used the corresponding side menu items will
be dimmed so that the settings cannot be changed.
Determines the output voltage when the data value is 1. The difference between
the high level and low level voltages must be between 0.5 and 9 V. The
displayed voltages are the voltages when the outputs are open.
Operation:
Set the pod output high level
Bottom button Popup menu Side button
%( % #
% "##
Determines the output voltage when the data value is 0. The difference between
the low level and high level voltages must be between 0.5 and 9 V. The
displayed voltages are the voltages when the outputs are open.
Operation:
Set the pod output low level
Bottom button Popup menu Side button
%( & % # &
% "##
High Level (P3420 only)
Low Level (P3420 only)