manualshive.com logo in svg

Tektronix DG2020A, User Manual

Share
Download
Tektronix DG2020A User Manual Download Page 166

SETUP Menu

DG2020A, P3410, & P3420 User Manual

3Ć65

Group Assign Menu

This menu is used to define groups for data bits. Up to 36 groups can be defined.
The popup menu shown in Figure 3-51 displays a table of the currently defined
groups.

  

 

Figure 3Ć51: Group assign popup menu

Adds a new group. A new group cannot be added if there are already 36 groups
defined.

The bit structure of a group is defined by specifying the MSB and LSB of the
group. If the bit structure of a new group overlaps with that of an existing group,
the newly defined group takes precedence and the structure of the existing group
is automatically modified. Figure 3-52 shows an example of a bit structure
assignment.

Add Group

Summary of Contents for DG2020A



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands