manualshive.com logo in svg

Tektronix DG2020A, User Manual

Share
Download
Tektronix DG2020A User Manual Download Page 132

EDIT Menu

DG2020A, P3410, & P3420 User Manual

3Ć31

Operation.

Set the scope

Bottom button

Popup menu

Side button

 

  

 

       

 

The cursor becomes the area cursor. The data in the editing range is deleted, and
data is filled in at the end of memory in an amount equal to the amount of data
deleted. The filled data (the tail) is set to 0. Note that the deleted data is inserted
in the paste buffer and can be used as paste data.

 

Figure 3Ć20: Cut

The cursor becomes the area cursor. The data in the editing range is copied to the
paste buffer. The pattern data itself is not affected.

Inserts the data in the paste buffer at the current cursor position. The data after
the cursor is moved to the rear by the length of the pasted data. After the data is
moved, data that exceeds the set memory size is lost.

  

Figure 3Ć21: Paste - insert

Cut

Copy

PasteĆinsert

Summary of Contents for DG2020A



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands