Tektronix DG2020A, User Manual

Page: 117 / 258

EDIT Menu
3Ć16
DG2020A, P3410, & P3420 User Manual
Table 3Ć4: Export parameters
Parameter Function
Export Data Bit Specifies the data bits to be written to the pattern data. Bits for which
this indicator is on are written. Bits can be selected using the general
purpose knob, andthe on/off state can be changedwith the left andright
arrow buttons. Consecutive bits can be turnedon or off using the 1 and
0 numeric keys.
Column separator Sets the line separator symbol. The delimiter symbols are usually used
as follows:
CR+LF: MSĆDOS andWindows
LF: UNIX
CR: Macintosh
Data separator Sets the interĆbit delimiter. Comma, space, or tab can be selected for
this parameter. Comma is the most common setting.
From This fieldis validwhen Enteredis specifiedfor the Region in the sub
menu. It specifies the starting position for the data written.
Size This fieldis validwhen Enteredis specifiedfor the Region in the sub
menu. It specifies the number of data points written.
When the AWG2000 Series format is selected, a menu that allocates data for a
total of 14 bits, MARKER 1 and 2 and DATA00 to DATA11, is displayed. Use
the arrow buttons to select the AWG2000 Series bit and use the general purpose
knob to allocate the DG2000 bit. Allocate all bits to be written by repeating this
operation.
Sub Menu
Item Function
Set All Data bits
(CSV only)
Sets the data bit write settings for all data bits.
Clear All Data bits
(CSV only)
Clears the data bit write settings for all data bits.
Region When this setting is set to All, the whole data area is written, and when
it is set to Entered, the data in the area specified by From and Size is
written.