Tektronix DG2020A, User Manual

Page: 244 / 258

DG2020A, P3410, & P3420 User Manual
CĆ1
Appendix C: Miscellaneous
This appendix covers the following items.
Repackaging for Shipment
Inspection and Cleaning
Factory Settings
Conversion Table Examples
Repackaging for Shipment
If this instrument is shipped by commercial transportation, use the original
packaging material. Unpack the instrument carefully from its shipping container
so that the carton and packaging material can be used for repackaging.
If the original packaging is unfit for use or is not available, repackage the
instrument as follows:
1. Obtain a corrugated cardboard shipping carton having inside dimensions at
least six inches greater than the instrument dimensions and having a carton
test strength of at least 275 pounds.
2. If the instrument is being shipped to a Tektronix Service Center for repair or
calibration, attach a tag to the instrument showing the following: the owner
of the instrument (with address), the name of a person at your firm who may
be contacted if additional information is needed, the complete instrument
type and serial number, and a description of the service required.
3. Wrap the instrument with polyethylene sheeting or equivalent to protect the
outside finish and prevent entry of packing materials into the instrument.
4. Cushion the instrument on all sides by tightly packing dunnage or urethane
foam between the carton and the instrument, allowing for three inches of
padding on each side (including top and bottom).
5. Seal the carton with shipping tape or with an industrial stapler.
6. Mark the address of the Tektronix Service Center and your return address on
the carton in one or more prominent locations.