TECO UA1610, Service Manual

Page: 55 / 388

D-12
(5) Removal of the Interface Board
1. Remove the Rear Cover.
☞
D-7
2. Remove the Network Control Unit Board. (
UA
1610f only)
☞
D-10
3. Unplug the three connectors on the Controller/
Mechanical Control Board. (For
UA
1610)
4. Unplug the five connectors on the Controller/
Mechanical Control Board. (For
UA
1610f)
NOTE
• The two connectors marked with “*” in the illustra-
tion are provided for
UA
1610f only.
4980D063AB
*
*
5. Remove the two screws.
6. Remove the Left Rear Cover.
4980U044AA
7. Remove the three screws.
8. Remove the Circuit Board and Metal Bracket.
4980E008AA
9. Remove the two screws.
10. Remove the Protective Metal Bracket for the
Interface Board.
4980D065AA
Field_Service_E.book 12 ページ ２００４年２月２５日 水曜日 午後６時５９分