TECO UA1610, Service Manual

Page: 201 / 388

S-106
(2) SRAM clear
• To clear the settings for the functions listed at the right and return the functions to their
default settings.
• The following items are cleared (initialization).
NOTES
• Before executing “SRAM CLEAR,” be sure to record the setting values that are to be ini-
tialized through “SRAM CLEAR.”
• For the record of the setting values, it is a good idea to have reports and lists printed.
☞
S-12 “Status mode/ Print report”
☞
S-98 “Service mode/ Reporting”
• Some setting values are not included any of these reports or lists. Be sure to make a
note of them separately.
• After “SRAM CLEAR” has been executed, make necessary entries of data again based
on the setting values recorded.
MODE Initialized Items Default Report/ List
UTILITY
MODE
MACHINE SETTING BUZZAR VOLUM LOW MACHINE STATUS LIST
☞
S-12
☞
S-15
ADMIN. MANEGE-
MENT REMOTE MONITOR LIMITED None None
FAX REGISTRATION ONE TOUCH DIAL
SPEED DIAL
GROUP DIAL
PROGRAM DIAL
BATCH TX
MAIL BOX None
None
None
None
None
None ONE TOUCH LIST
SPEED DIAL LIST
KEY SETTING LIST
MACHINE STATUS LIST
☞
S-12
☞
S-14
☞
S-15
TX OPERATION SCAN CONTRAST
RESOLUTION
DEFAULT TX
HEADER 0
STD
MEM. TX
ON MACHINE STATUS LIST
☞
S-12
☞
S-15
RX OPERATION MEMORY RX MODE
NO. of RINGS
REDUCTION RX
RX PRINT
RX MODE
FORWARD
FOOTER
SELECT TRAY
CLOSED NETWORK\ OFF
2
ON
MEMORY RX
AUTO RX
OFF
OFF
ENABLE
OFF MACHINE STATUS LIST
☞
S-12
☞
S-15
COMM. SETTING TONE/ PULSE
LINE MONITOR
PSTN/ PBX TONE
LOW
PSTN MACHINE STATUS LIST
☞
S-12
☞
S-16
REPORTING ACTIVITY REPORT
RESERV. REPORT
TX RESULT REPORT
RX RESULT REPORT ON
OFF
OFF
OFF MACHINE STATUS LIST
☞
S-12
☞
S-16
INIRTIAL USER DATA DATE & TIME
USER FAX NO.
USER NAME None
None
None MACHINE STATUS LIST
☞
S-12
☞
S-16
NETWORK SETTING IP ADDRESS
SUBNET MASK
GATE WAY
DNS CONFIG
GATE WAY TX None
None
None
DISABLE
DISABLE MACHINE STATUS LIST
☞
S-12
☞
S-16
Field_Service_E.book 106 ページ ２００４年２月２５日 水曜日 午後６時５９分