TECO UA1610, Service Manual

Page: 129 / 388

S-34
(5) Copy setting
• The default settings for each copy function can be specified.
(6) FAX registration
• From the “FAX REGISTRATION” menu, various settings can be specified in order to take
advantage of this machine’s many fax functions.
No. Function Purpose Setting Details/Precautions
1
PAPER
PRIORITY
To specify the paper tray that is
given priority. • The default setting is “TRAY1”.
TRAY1 TRAY2
2
DENSITY PRI-
ORITY
To specify the image density set-
ting that is selected when the
machine is turned on or the Panel
Reset key is pressed. • The default setting is “AUTO”.
AUTO MANUAL PHOTO
3
DENSITY
LEVEL (A)
To specify the default density level
when the Auto setting is selected. • The default setting is “NOR-
MAL ( 0 )”.
The setting range is -1 to +1.
4
DENSITY
LEVEL (M)
To specify the default density level
when manually setting the image
density. • The default setting is “NOR-
MAL ( 0 )”.
The setting range is -4 to +4.
5
OUTPUT PRI-
ORITY
To specify the default finishing set-
ting. • The default setting is “NON”.
NON SORT
6 RESOLUTION
To specify the scanning resolution. The default setting is “600
×
300”.
600
×
300 600
×
600
No. Function Purpose Setting Details/Precautions
1
ONE-TOUCH
DIAL
This function can be used to pro-
gram one-touch dial keys with fax
numbers, allowing the recipient to
be specified easily and accurately
without the need to manually enter
the number using the 10-Key Pad.
This dialing method is convenient
for programming numbers where
faxes are frequently sent to. A maximum of 15 fax numbers
can be programmed.
The contents of registration.
• Destination name:
20characters.
• Dial No.: 30 digits.
• Sub address: 20 digits.
• SID: 20 digits.
• Modem speed: 33.6 kbps/
14.4kbps/ 9.6 kbps
• Registered data: Automati-
cally.
Field_Service_E.book 34 ページ ２００４年２月２５日 水曜日 午後６時５９分