TECO UA1610, Service Manual

Page: 278 / 388

S-183
10-3. Table of reference code
Code Function
CFR Confirmation to Receive. 1850 Hz or 1650 Hz 3 sec.
CIG Calling Station Identification.
CRP Command Repeat.
CSI Called Subscriber Identification.
DCN Disconnect.
DCS Digital Identification Signal.
DIS Digital Transmit Command.
DTC Digital Transmit Command.
EOM End of Message. 1,100 Hz.
EOP End of Procedure.
FTT Failure to Train.
MCF Message Confirmation. 1,650 Hz or 1,850 Hz.
MPS Multi-Page Signal.
NCS Non-Standard Facilities Command.
NCF Non-Standard Facilities.
NSS Non-Standard Facilities Set-up.
PIN Procedural Interrupt Negative.
PIP Procedural Interrupt Positive.
PRI-EOM Procedure Interrupt-End of Message (COM).
PRI-MPS Procedure Interrupt-Multi page Signal (MPS).
PRI-EOP Procedure Interrupt-End of Procedure (EOP).
RTN Retrain Negative.
RTP Retrain Positive.
TSI Transmitting Station Identification.
Field_Service_E.book 183 ページ ２００４年２月２５日 水曜日 午後６時５９分