TECO UA1610 Service Manual Download Page 337

Page: 337 / 388

D-1

MAINTENANCE SCHEDULE

• To ensure that the printer produces good printed pages and to extend its service life, it is

recommended that the maintenance jobs described in this schedule be carried out as

instructed.

NOTES

•

K = 1,000 printed pages

•

As a rule, the Drum Cartridge and Toner Cartridge are to be replaced by the user.

•

The contents of the Maintenance List are subject to change without notice.

•

For the part numbers, see Parts Manual and Parts Modification Notice.

PM Parts

Clean

Replace

Ref. Page in This Manual

Paper Take-Up Roll

10 K

–

☞

D-2

Pick-Up Roller

☞

D-3

Regist Roller

☞

D-4

Exit Roller

☞

D-4

Paper Separator Pad

50 K

☞

D-5

Field_Service_E.book 1 ページ２００４年２月２５日　水曜日　午後６時５９分

Summary of Contents for UA1610





































































































































































































































































































































































































Search results

Summary of Contents for UA1610

Reviews:

Related manuals for UA1610

Brands by name

Popular brands

TECO UA1610, Service Manual

Search results

Summary of Contents for UA1610

Reviews:

Related manuals for UA1610

Brands by name

Popular brands