TECO UA1610, Service Manual

Page: 151 / 388

S-56
(14) E-mail setting 2
• Available only if the Internet Fax & Network Scan Kit SU-6 is installed.
• Depending on the network environment in which the machine is located, there may be
some restrictions on the network functions that the machine can use. Make the network
settings to suit the functions and environment required for customer’s location. The net-
work settings can be specified from the control panel or using the administrator mode of
PageScope Light.
No. Function Purpose Setting Details/Precautions
1
POP3
SERVER
This function is used to enter the
IP address or host name of an
POP3 server.
NOTE
Please consult customer’s net-
work administrator for information
about the IP address to use.
• Up to 64 characters can be
entered for the host name.
• The DNS settings must have
been specified before speci-
fying the host name for the
POP3 server.
2
POP3 PORT
NO.
This function is used to enter the
port number (1 to 65535) for the
POP3 server.
NOTE
Please consult customer’s net-
work administrator for information
about the port number to use.
• The port number can be set
between 1 and 65535.
• Normally, port number 110 is
used.
3
POP3 TIME-
OUT
This function is used to specify the
length of time (in seconds) before
the connection to the POP3 server
times out. (30 to 300 seconds) • The default setting is “60”.
• The time out period can be
between 30 and 300 sec-
onds.
4
POP3
ACCOUNT
This function is used to enter the
account name used to log on to the
POP3 server.
NOTE
Please consult customer’s net-
work administrator for information
about the account name to use.
Up to 64 characters can be
entered for the account name.
Field_Service_E.book 56 ページ ２００４年２月２５日 水曜日 午後６時５９分