TECO UA1610, Service Manual

Page: 207 / 388

S-112
9. Soft Switch Set (
UA
1610f only)
9-1. Description
• This machine is provided with a total of 64 soft switches used for making various adjust-
ments. The initial values can be changed, defined to comply with the requirements
unique to each individual country.
• The initial settings of the soft switches can be changed according to the marketing area.
The settings can be changed when:
The marketing area code is set in the Service mode.
The marketing area code is set using the RSD utility software.
SRAM is cleared using the Service mode. In this case, the initial settings are
determined according to the current marketing area code.
• The bit status can be changed by the following methods:
1. Use Soft Switch available as a Service Mode function.
☞
S-79 “Service mode”, S-97 “Soft switch function”
2. Use the RSD software function.
Hex-binary
conversion list
HEX
0 1 2 3 4 5 6 7 8 9 A B C D E F
Bit no.
4 (8) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
3 (7) 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
2 (6) 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1
1 (5) 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
SERVICE MODE
6.SOFT SWITCH SOFT SWITCH
#01= 10000000
YES
Bit No. 1 2 3 4 5 6 7 8
Field_Service_E.book 112 ページ ２００４年２月２５日 水曜日 午後６時５９分