TECO UA1610, Service Manual

Page: 87 / 388

D-44
(2) Procedure for Upgrading the Firmware
(Engine firmware/ Copier firmware/ FAX firmware)
NOTES
• The engine firmware, Copier firmware, and FAX firmware can be upgraded by using the
following procedure.
• For the upgrading procedure of NIC firmware, see “NIC NC-
1610
Upgrading the Firmware.”
☞
D-1
1. Turn on the printer.
2. Start up the host computer (Windows 98 or later).
3. Copy the “Update Software” folder and “Update” file to drive C. (Copy them into the
highest directory on drive C.)
4. Use a USB cable to connect the printer to the host computer. (Wait until the hardware is
detected.)
5. Display the “System Properties” dialog box (“Properties” for “My Computer”), click the
“Hardware” tab, click the [Device Manager] button, select “Imaging devices”, and then
check that “
Docujet UA
1610” has been added.
6. Double-click “Update” file in the “Update Software” folder.
The “A3S/A4S Update F/W-V1.XX” dialog box appears.
4980D045AA
4980D046AA
4980D047AA
Field_Service_E.book 44 ページ ２００４年２月２５日 水曜日 午後６時５９分