TECO UA1610, Service Manual

Page: 203 / 388

S-108
(3) Memory clear
• To clear the settings for the functions listed at the right and return the functions to their
default settings.
• The following items are cleared (initialization).
NOTES
• Before executing “SRAM CLEAR,” be sure to record the setting values that are to be ini-
tialized through “SRAM CLEAR.”
• For the record of the setting values, it is a good idea to have reports and lists printed.
☞
S-12 “Status mode/ Print report”
☞
S-98 “Service mode/ Reporting”
• Some setting values are not included any of these reports or lists. Be sure to make a
note of them separately.
• After “SRAM CLEAR” has been executed, make necessary entries of data again based
on the setting values recorded.
MODE Initialized Items Default Report/ List
UTILITY
MODE
MACHINE SETTING AUTO PANEL RESET
ENERGY SAVE MODE
DENSITY(ADF)
DENSITY(BOOK)
PRINT DENSITY
LCD CONTRAST
LANGUAGE
LAMP OFF TIME
BUZZAR VOLUM
INITIAL MODE 1
15MIN.
MODE1
MODE1
0
0
ENGLISH
MODE1
LOW
COPY MACHINE STATUS LIST
☞
S-12
☞
S-15
PAPER SOURCE
SETUP TRAY1 PAPER METRIC
A4L/
PLAIN INCH
LETTER/
PLAIN MACHINE STATUS LIST
☞
S-12
☞
S-15
TRAYSETTING CONTINUOUS
ADMIN. MANEGE-
MENT REMOTE MONITOR LIMITED None None
COPY SETTING PAPER PRIORITY
DENSITY PRIORITY
DENSITY LEVEL(A)
DENSITY LEVEL(M)
OUTPUT PRIORITY
RESOLUTION TRAY1
AUTO
0
0
NON
600X300 MACHINE STATUS LIST
☞
S-12
☞
S-15
FAX REGISTRATION ONE TOUCH DIAL
SPEED DIAL
GROUP DIAL
PROGRAM DIAL
BATCH TX
MAIL BOX None
None
None
None
None
None ONE TOUCH LIST
SPEED DIAL LIST
KEY SETTING LIST
MACHINE STATUS LIST
☞
S-12
☞
S-14
☞
S-15
TX OPERATION SCAN CONTRAST
RESOLUTION
DEFAULT TX
HEADER 0
STD
MEM. TX
ON MACHINE STATUS LIST
☞
S-12
☞
S-15
RX OPERATION MEMORY RX MODE
NO. of RINGS
REDUCTION RX
RX PRINT
RX MODE
FORWARD
FOOTER
SELECT TRAY
CLOSED NETWORK\ OFF
2
ON
MEMORY RX
AUTO RX
OFF
OFF
ENABLE
OFF MACHINE STATUS LIST
☞
S-12
☞
S-15
COMM. SETTING TONE/ PULSE
LINE MONITOR
PSTN/ PBX TONE
LOW
PSTN MACHINE STATUS LIST
☞
S-12
☞
S-16
Field_Service_E.book 108 ページ ２００４年２月２５日 水曜日 午後６時５９分