TECO UA1610, Service Manual

Page: 32 / 388

G-10
4. HANDLING OF THE CONSUMABLES
Before using any consumables, always read the label on its container carefully.
• Paper can easily damp. To prevent absorption of moisture, store paper in a place with lit-
tle moisture.
• Keep consumables out of the reach of children.
• Do not touch the PC Drum with bare hands.
• The same sized paper is of two kinds, short grain and long grain. Short grain paper
should only be fed through the printer crosswise, while long grain paper should only be
fed lengthwise. The wrapper of the paper is properly marked.
• If your hands become soiled with toner, wash them with soap and water.
• Do not throw away any used consumables. They are to be collected.
• Do not burn, bury in the ground, or throw into the water any consumables.
• Do not store consumables in a place which:
✽
Is hot and humid.
✽
Is subject to direct sunlight.
✽
Has an open flame nearby.
5. MISCELLANEOUS PRECAUTIONS
Use the following precautions when performing service jobs for a printer that uses a laser.
• When a service job needs to be performed in the laser beam path, such as when working
around the Print Head Unit or PC Drum, be sure first to unplug the power cord of the
printer from the outlet.
• If the service job requires that the power cord be left plugged in, observe the following
precautions:
1. Take off your watch, ring, and any other reflective object and wear laser protective gog-
gles.
2. Keep users away from the job site.
3. Do not bring a highly reflective tool into the laser beam path during the service job.
Field_Service_E.book 10 ページ ２００４年２月２５日 水曜日 午後６時５９分