TECO UA1610, Service Manual

Page: 117 / 388

S-22
(2) Paper Source Setting
• Various settings for the paper tray can be specified.
(3) User management
• Various functions for use of the machine can be set.
No. Function Purpose Setting Details/Precautions
1
TRAY1
PAPER
To specify the type and size of
paper loaded into Tray1. • The default settings are
“PLAIN” in addition to “A4 L”
or “LT”.
<Procedure>
1. Select the paper type.
PLAIN OHP CARD ENVELOPE
2. Select the paper size.
A5 B5
A4 FLS 16K HL LT LG
NOTE
If “OHP” is selected as the
paper type, only “A4” and “LT”
are available as paper sizes.
3. To specify a custom paper
size, type in the size.
2
TRAY
SETTING
To specify whether or not auto tray
switching is enabled for each
paper tray. • The default setting is “CON-
TINUOUS”.
FIXED CONTINUOUS
No. Function Purpose Setting Details/Precautions
1 CHANGE DC?
To clear the I/C COUNTER value.
NOTES
• If the Drum Cartridge has
been replaced, never fail to
use this function to clear the
“I/C COUNTER” value.
• This function has the same
effect as “SERVICE MODE/
CLEAR DATA/I/C
COUNTER.”
☞
S-73
Field_Service_E.book 22 ページ ２００４年２月２５日 水曜日 午後６時５９分