P-1
Read carefully the Safety and Important Warning Items described below to understand
them before doing service work.
Because of possible hazards to an inexperienced person servicing this product as well as
the risk of damage to the product,
TECO Image Systems Co
.
, Ltd
(hereafter
called the
TECO
) strongly recommends that all servicing be performed only by
TECO
-
trained
service technicians.
Changes may have been made to this product to improve its performance after this Service
Manual was printed. Accordingly,
TECO
does not warrant, either explicitly or implicitly, that
the information contained in this Service Manual is complete and accurate.
The user of this Service Manual must assume all risks of personal injury and/or damage to
the product while servicing the product for which this Service Manual is intended.
Therefore, this Service Manual must be carefully read before doing service work both in the
course of technical training and even after that, for performing maintenance and control of
the product properly.
Keep this Service Manual also for future service.
In this Service Manual, each of three expressions “
DANGER”, “
WARNING”, and
“
CAUTION” is defined as follows together with a symbol mark to be used in a limited
meaning.
When servicing the product, the relevant works (disassembling, reassembling, adjustment,
repair, maintenance, etc.) need to be conducted with utmost care.
Symbols used for safety and important warning items are defined as follows:
SAFETY AND IMPORTANT WARNING ITEMS
IMPORTANT NOTICE
DESCRIPTION ITEMS FOR DANGER,
WARNING AND CAUTION
DANGER
: Action having a high possibility of suffering death or serious injury
WARNING
: Action having a possibility of suffering death or serious injury
CAUTION
: Action having a possibility of suffering a slight wound, medium
trouble, and property damage
:Precaution when servicing the product.
General precaution
Electric hazard
High temperature
:Prohibition when servicing the product.
General prohibition
Do not touch
with wet hand
Do not disassemble
:Direction when servicing the product.
General instruction
Unplug
Ground/ Earth
Field_Service_E.book 1 ページ 2004年2月25日 水曜日 午後6時59分
Summary of Contents for UA1610
