TECO UA1610, Service Manual

Page: 128 / 388

S-33
NOTES
< Precautions for Changing the Setting of ADMIN. MANAGEMENT/REMOTE MONITOR>
If the user machine setting has been changed from “LIMITED” to “FULL” or vice versa while
RSD (Remote Setup Diagnostic) communication is established, perform the following oper-
ations:
• Temporarily disconnect the communication and re-execute “Remote Connect.”
• Press the “Disconnect” key to disconnect the communication.
• The specific changes made in the setting of REMOTE MONITOR are not validated
unless the connection is made again.
< Precautions for Using the RSD (Remote Setup Diagnostic)>
• When a connection is established with a local machine using the RSD, the following mes-
sage appears on the Display and no operations can be made from the “Control Panel” of
the local machine. Neither the PC print nor Scanner function can be accepted.
• No connection can be made with the RSD during operation from the “Control Panel” of
the local machine. Make the connection while no operations are performed on the local
machine.
• As is the case with the RSD, operations from the “Control Panel” of the local machine, PC
print, and Scanner function are not accepted while a connection is being established with
the local machine using the LSD (Local Setup Diagnostic) and PageScope Lite/Admin.
mode.
• As is the case with the RSD, no connection can be made with LSD and PageScope Lite/
Admin. mode during operation from the “Control Panel” of the local machine. Make the
connection while no operations are performed on the local machine.
4980P533AA
4980P534AA
Field_Service_E.book 33 ページ ２００４年２月２５日 水曜日 午後６時５９分