TECO UA1610, Service Manual

Page: 51 / 388

D-8
No. Name Removal Procedure
1 Original Cover Open the Original Cover
→
Pull it straight up.
2
Upper Cover Assy.
(Original Glass)
Remove the Original Cover.
→
Remove the Control
Panel.
→
Remove the six screws, and remove the Upper
Cover Assy. (Original Glass).
☞
D-20
3 Control Panel
Open the Original Cover.
→
Remove the three screws,
unplug the connector and the flat cable, and remove the
Control Panel.
☞
D-11
4 Exit tray While pressing out one side, remove the Exit tray.
5 Front Door
Open the Front Door.
→
While pressing in one side,
remove the Front Door.
6 Bypass Tray –
7 Tray1
Hold down the main unit with one hand and pull Tray1 off
toward you.
8 Left Cover
Open the Front Door.
→
Remove the screw, unhook the
six tabs, and remove the Left Cover.
9 Right Cover
Open the Front Door.
→
Remove the two screws, unhook
the four tabs, and remove the Right Cover.
10 Rear Cover Remove the five screws, and remove the Rear Cover.
Field_Service_E.book 8 ページ ２００４年２月２５日 水曜日 午後６時５９分