TECO UA1610, Service Manual

Page: 198 / 388

S-103
V.34 Communication (example)
7-11. Admin. Registration (Administrator number registration)
• The administrator number (0 to 999999) required for the Administrator mode of Utility is
programmed or changed.
1. Remote monitor
☞
S-32 “Utility mode/ Admin. management/ Remote monitor”.
Setting value Description Default
LIMITED Enable remote monitor function limitedly
❍
FULL Enable remote monitor function fully
OFF Disable remote monitor function
NAME: ABC
TEL:886 3 4733507
DATE: APR.10’97 12:20
SESSION FUNCTION NO DESTINATION STATION DATE TIME PAGE MODE RESULT
0001 TX 01
ABC
22345678901234567890
DEC.02
15:00 008
ECM-
12
OK
TX RX DATA
ANS
CM
JM
CJ
NSF NSS FF 03 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CSI DCS FF 03 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
DIS TCF FF 13 80 00 00 00 00 00
FF 03 20 00 00 00 00 00 00 00 00 00 00
PIX FF 13 83 00 00 00 00 00 00 00 00 00
EOP
CFR FF 13 84
DCN
FF 13 BF 2F 00 00 41
MCF FF 13 8C
FF 13 FB
V.8 PROTOCOL DUMP
TRAINING PHASE
DATA PHASE
PROTOCOL MONITOR REPORT
Field_Service_E.book 103 ページ ２００４年２月２５日 水曜日 午後６時５９分