7B1-98
AUTOMATIC TRANSMISSION (4 A / T)
1. Clutch disc facing side
16) Remove second brake hub assembly (1) from planetary sun
gear (2).
17) Remove 2 sun gear seal rings (1) from planetary sun gear.
NOTE:
Use care not to open sun gear seal ring more than neces-
sary.
ASSEMBLY
Assemble components by reversing disassembly procedure and
noting the following points.
D
Snap both ends of sun gear seal ring (1) securely.
D
Do not open sun gear seal ring more than necessary.
D
Always use new O-ring and apply A / T fluid before installation.
D
When installing O-ring, make sure that it is not kinked or caught.
D
Push in brake piston horizontally.
D
When installing brake piston return spring, be careful so that
spring will not fall or tilt.
D
When installing snap ring, do not align lug (1) of retainer with
opening in snap ring (2).
D
When installing brake discs, brake plates and clutch backing
plate, refer to the first figure of “CENTER SUPPORT” in this sec-
tion.
D
Install clutch backing plate with its chamfered side facing brake
disc.
