7B1-68
AUTOMATIC TRANSMISSION (4 A / T)
D
When shift solenoid valve (1) is connected to battery (2), confirm
that shift solenoid valve is open condition by blowing air (50 –
200 kpa, 0.5 – 2.0 kg / cm
2
, 7 – 28.5 psi) into solenoid valve as
shown in the figure.
D
When shift solenoid valve (1) is not connected to battery (2), con-
firm that shift solenoid valve is close condition by blowing air (50
– 200 kpa, 0.5 – 2.0 kg / cm
2
, 7 – 28.5 psi) into solenoid valve as
shown in the figure.
D
When TCC solenoid valve (1) is connected to battery (2), confirm
that shift solenoid valve is close condition by blowing air (50 –
200 kpa, 0.5 – 2.0 kg / cm
2
, 7 – 28.5 psi) into solenoid valve as
shown in the figure.
D
When TCC solenoid valve (1) is not connected to battery (2), con-
firm that TCC solenoid valve is open condition by blowing air (50
– 200 kpa, 0.5 – 2.0 kg / cm
2
, 7 – 28.5 psi) into solenoid valve as
shown in the figure.
PRESSURE CONTROL SOLENOID VALVE
INSPECTION
Resistance Check
Measure resistance between pressure control solenoid valve (1)
terminals.
Pressure control solenoid valve resistance
Standard: 5.0 – 5.6
Ω
(at 20
_
C (68
_
F))
