ENGINE MECHANICAL (RHZ ENGINE)
6A3-13
21) Install crankshaft pulley (1) with crankshaft locked by using flat
end rod (2) or the like, apply sealant to crankshaft pulley bolt
and tighten it gradually as follows.
a) Tighten bolt to 40 N
.
m (4.0 kg-m, 29.0 lb-ft)
b) Tighten bolt to 195 N
.
m (19.5 kg-m, 141 lb-ft) by turning it to
about 50
_
.
Tightening Torque
Crankshaft pulley bolt (a): 195 N
.
m (19.5 kg-m, 141 lb-ft)
Sealant:
“A”: LOCTITE 273
22) Install bracket (1).
23) Install radiator referring to “RADIATOR” in Section 6B.
24) Refill cooling system referring to Section 6B.
25) Install generator belt referring to “GENERATOR BELT” in Sec-
tion 6H.
26) Connect negative cable to battery.
27) Check to make sure that there is no coolant leakage or fuel
leakage at hose connection.
