2
MANUAL TRANSMISSION
7A2-33
D
Using cylinder gauge (1), check inside diameter of counter shaft
5th gear (2). If measured value exceeds specification, replace
gear.
Counter shaft 5th gear diameter:
Standard: 33.000 – 33.025 mm (1.2992 – 1.3002 in.)
D
Check oil clearance between reverse idle gear (2) and shaft (1)
by measuring inside diameter of gear and diameter of shaft and
calculate its clearance.
If clearance exceeds limit, replace gear and shaft.
Oil clearance between reverse idle gear and shaft
Standard: 0.041 – 0.074 mm (0.0016 – 0.0029 in.)
Limit: 0.13 mm (0.005 in.)
D
Check clearance between reverse idle gear (2) and end (1) of re-
verse gear shift link.
If clearance exceeds limit, replace shoe.
Clearance between reverse idle gear and shoe
Standard: 0.05 – 0.35 mm (0.002 – 0.014 in.)
Limit: 0.7 mm (0.028 in.)
