7B1-112
AUTOMATIC TRANSMISSION (4 A / T)
4. Upper spring
5. Lower spring
6. Coil outer diameter
29) Align hole in manual shift shaft with that in manual shift lever
and drive in new manual shift lever pin (1).
30) Align hole in sleeve cover with dent in manual shift lever and
caulk securely with pin punch (1). Then check that manual shift
shaft turns smoothly.
31) With parking lock rod (1) installed to manual shift lever, place
parking lock rod (1) on parking lock pawl (2) as shown in the
figure. Then install pawl bracket and tighten bracket screw to
specified torque.
Tightening torque
Pawl bracket screw: 7.5 N
.
m (0.75 kg-m, 5.5 lb-ft)
32) Apply A / T fluid to new O-rings and install them to accumulator
pistons (1, 2, 3) and install accumulator pistons to transmission
case.
