Upper side
7A2-54
MANUAL TRANSMISSION
44) Apply sealant to input shaft bearing retainer bolt and install in-
put shaft bearing retainer (1), new gasket and its bolts.
“A”: Sealant 99000-31110
Tightening torque
Input shaft bearing retainer bolts (a):
25 N
.
m (2.5 kg-m, 18.0 lb-ft)
45) Clean mating surface of rear case and apply sealant evenly to
rear case side of intermediate case in the same manner as
Step 41).
Sealant: 99000-31110
46) Install rear case to intermediate case.
Tightening torque
Rear case to intermediate case bolts (a):
38 N
.
m (3.8 kg-m, 27.5 lb-ft)
47) With tip end of gear shift shaft inner lever (1) hooked on head
of gear shift shaft (2), insert gear shift inner shaft (3) into gear
shift shaft inner lever.
