7E-14
DIFFERENTIAL (FRONT)
2. Mounting bracket R
DISMOUNTING
1) Lift up vehicle and drain oil.
2) Disconnect air hose and breather hose from differential housing.
3) Before removing propeller shaft, give match marks (1) on joint
flange and propeller shaft as shown.
4) Remove propeller shaft flange by removing its 4 bolts and sus-
pend it with cord or the like.
NOTE:
If pull out propeller shaft, transfer oil must be drained be-
fore pulling out.
5) Remove bolts (1) for left mounting bracket and bolts and nuts (2)
for drive shaft flange to set left side of differential free.
6) Remove bolts (1, 2) and rear mounting bracket (3).
7) Remove bolts (4) and rear mounting bracket No.2 (5).
8) With differential housing assembly held with transmission jack,
remove mounting bracket bolts (1) on right end of housing (3).
