CLUTCH
7C1-3
(B)
1
1
2
(A)
1. Input shaft bearing
2. Flywheel
3. Clutch disc
4. Clutch cover
5. Bolt
6. Release bearing
7. Clutch release fork
8. Boot
9. Clip
10. Clutch release fork support
11. Flywheel bolt
: Tightening Torque
: Do not Reuse
11 50 N·m (5.0 kg-m, 36.5 lb-ft)
UNIT REPAIR
CLUTCH COVER, CLUTCH DISC AND FLYWHEEL
DISMOUNTING / REMOUNTING
Refer to SECTION 7A2 “DISMOUNTING / REMOUNTING OF
TRANSMISSION”.
REMOVAL
1) Hold flywheel stationary with special tool and remove clutch cov-
er bolts (1), clutch cover (2) and clutch disc.
Special Tool
(A): 09924-17811
2) Pull out input shaft bearing (1) by using special tool and wrench.
Special Tool
(B): 09923-73210
3) Remove release bearing and release fork.
