Surveon NVR7312(2U), User Manual, Page: 88 / 367

88
(1) When you access EonOne Lite for the first time, a Start Quick Setup will show up
for configuring storage device guidance.
Step 1 Configuring new partition
You can see the front view and indicator lights of the storage device or JBODs (if
any) displaying the status of the device(s) and hard drives.
To the right of the front view, you can see the RAID level and the capacity of the
partition which is about to be created from the newly added storage device and
its connected JBODs (if any).
Step 2 Creating a partition
Click Apply to continue with the next step, which enables the system to create a
new partition based on the settings you configured in the previous step.
Step 3 Finishing Quick Setup
When the partition is created, you can do either of the following

Click Device Management to enter the management GUI of EonOne Lite.

Click Logout to leave EonOne Lite.