Surveon NVR7312(2U) User Manual Download Page 27

Page: 27 / 367

3U System

Connection between RAID and JBOD

The following rule applies when connecting RAID and JBOD(s):



2U systems connect to 2U JBODs.



3U systems connect to 3U JBODs.

Chassis

The RAID chassis is a rugged storage chassis divided into front and rear sections.

The chassis is designed to be installed into a rack or cabinet.

Internal Backplane

An integrated backplane separates the front and rear sections of the chassis.

This circuit board provides logic level signals and low voltage power paths.

Thermal sensors and I2C devices are embedded to detect system temperatures

and PSU/cooling module operating status. This board contains no user-

serviceable components.

WARNING

Accessing the backplane board may lead to fatal damage of the system. Also,
physical contact with the backplane board may cause electrical hazards.

Summary of Contents for NVR7312(2U)
















































































































































































































































































































































































Search results

Summary of Contents for NVR7312(2U)

Reviews:

Brands by name

Popular brands

Surveon NVR7312(2U), User Manual

Search results

Summary of Contents for NVR7312(2U)

Reviews:

Brands by name

Popular brands