204
Note:
Drivers for supported GSM/GPRS modems have already been installed on the server.
Currently, only the
WaveCOM-M1206B
is supported. Use COM1 on the Server to
connect to a GSM modem.
1.
In the
Contact Number
field, enter the phone numbers that will receive SMS
notifications. Be sure to include the area code, e.g., “86”, in front of phone
numbers. Use commas, “,” to separate individual phone numbers.
2.
Use the slider bar to select a delay between the occurrence of an event and
SMS message delivery.
3.
(Optional)
If a SIM PIN is required, enter the PIN code in the
PIN
field. Note
that applying incorrect PIN code may disable your SIM card.
Note:
To change the PIN code, remove the SIM card from your GSM modem. Use a cell
phone to change the PIN code and then re -install SIM card into the GSM
modem. Changing PIN codes is not recommended because a configuration
failure may disable your SIM card.
4.
In the
SMS Content
field, type a simple description to include in the outgoing
SMS messages
5.
(Optional)
Click
Test
to send a test message to the phone numbers listed.
6.
Click the
Apply
button to apply the changes.
7.
Click the
OK
button to exit
SMS settings.
Relay Output
Summary of Contents for NVR7312(2U)
