Surveon NVR7312(2U) User Manual Download Page 121

Page: 121 / 367

121



Storage Quota

In the

Minimum Free Space

field, the Minimum space required for storage is

shown. The storage will be last for 30 days. Click on the items in the Position

section and use the

and

Down

buttons to change the storage priorities.



Time Setup

To set the server time click on the number you wish to change and enter a value.

Click

to preserve the setting. The default time is set according to the real-

time clock on server.



Time Synchronize

Summary of Contents for NVR7312(2U)
















































































































































































































































































































































































Search results

Summary of Contents for NVR7312(2U)

Reviews:

Related manuals for NVR7312(2U)

Brands by name

Popular brands

Surveon NVR7312(2U), User Manual

Search results

Summary of Contents for NVR7312(2U)

Reviews:

Related manuals for NVR7312(2U)

Brands by name

Popular brands