169
3.
Click and drag the white dots along window border of a window to resize or
reshape the window.
4.
Click the interior of a window to drag it to the desired position.
5.
If an object size has not yet been defined, select
Define Object
and click the
New Region
button to create an object box.
6.
Click and drag the corners of the object box to define the minimum size of the
intrusion that will be detected.
7.
Adjust the sliders: (Settings will be applied to all existing windows)
Duration (Sec)
-
Adjusts how much time an object is missing before an
event is triggered.
8.
Click
OK
to save the changes and exit the popup.
Testing Detection Windows
To test a detection window:
1.
Right-click the camera entry in the Camera List below the Live View, then
highlight and click the
VI Setup > Intrusion
>
Select Camera
option.
2.
Click
Save Reference Image
to have a reference image saved and the system
will use this saved image to compare with the live recording image to see if
there is any different; when the 2 images are different, the alarm will be
triggered.
3.
Click the
Begin Simulation
button enable test detection. During testing a red
border will appear if any intrusion found.
4.
Click
End Simulation
to end the simulation.
5.
Click
OK
to exit the popup.
Summary of Contents for NVR7312(2U)
