71
4.5.5.
Connecting JBOD
The following illustration is the recommended JBOD expansion connection; the
maximum of JBOD expansion connection is up to 3 sets.
Setting JBOD IDs
Use a small flat blade screwdriver to set the JBOD enclosure ID(s). A different ID
number must be allocated for each JBOD.
Configuring enclosure IDs:
The configurable IDs for JBODs are from 1 to 15. Usually the numbering starts
from the one closest to the managing RAID enclosure.
Make sure a unique ID is configured on each JBOD so that the SAS WWN addresses of
disk drives can be properly assigned. NVR7300 system firmware automatically
manages these addresses.
JBOD Expansion Connections
•
EonServer SAS exp. – 1st JBOD SAS-IN
•
1st JBOD SAS-OUT – 2nd JBOD SAS-IN .. and so forth!
Summary of Contents for NVR7312(2U)
