Surveon NVR7312(2U) User Manual Download Page 200

Page: 200 / 367

200

Disk Error

The alarm is triggered when a disk drive failure occurs.

Video Loss

When video input is lost, the alarm is triggered. Clicking on the

Details

button will

pull up the

Video Loss Settings

menu, listing all the cameras. From this menu, click

the checkboxes next to the cameras that will be used to trigger the Alarm.

Optionally, check the

All Cameras

check box to use all the cameras available. Click

the

button to exit the menu.

Actions

The following alarm actions can be taken when the alarm is triggered:

Event Log

The system issues event messages when the alarm is triggered.

PTZ Control

When the alarm is triggered, a Pan-Tilt-Zoom action can be set to slew the camera

to a particular position. For example, clicking on the

Action

button brings up the

PTZ Action Settings

menu. In this menu:

Summary of Contents for NVR7312(2U)
















































































































































































































































































































































































Search results

Summary of Contents for NVR7312(2U)

Reviews:

Related manuals for NVR7312(2U)

Brands by name

Popular brands

Surveon NVR7312(2U), User Manual

Search results

Summary of Contents for NVR7312(2U)

Reviews:

Related manuals for NVR7312(2U)

Brands by name

Popular brands