Surveon NVR7312(2U) User Manual Download Page 241

Page: 241 / 367

241

Note:

The system may take a while to buffer the video before playback starts. A status

line above the timeline will indicate portions that have been buffered. Jumping

to un-buffered points in the video will cause the system to display an error

message.

Clicking on a selected portion of the timeline will cause playback to jump to the point

that you have clicked on. You must start playback separately for each feed you wish to

view.

The following table explains the buttons:

Snapshot

Audio volume

Time range can be set when viewing the playback.

Full frame mode

Key frame mode

Saves video clips/Exports selected clips

Clear all the Cue-Ins and Cue-Outs

Set Cue-In marker for clip start

Set Cue-In marker for clip end

Automatic reply the clip.

(From Cue-in to Cue-Out)

Play backwards

Starts video playback

Pause video playback

Summary of Contents for NVR7312(2U)
















































































































































































































































































































































































Search results

Summary of Contents for NVR7312(2U)

Reviews:

Brands by name

Popular brands

Surveon NVR7312(2U), User Manual

Search results

Summary of Contents for NVR7312(2U)

Reviews:

Brands by name

Popular brands