Surveon NVR7312(2U) User Manual Download Page 32

Page: 32 / 367

2.5.2. Controller Connections

Reset to default button and LED

10.

HDMI port

(Video only, Res: 1920

x1080@60Hz)

PCI-E expansion slot

11.

USB 2.0 port

Controller status LED

12.

USB 3.0 port

Host Busy LED

13.

3.5mm microphone jack

Cache Dirty LED

14.

3.5mm headphone jack

Reserved LEDs

15.

1 Gb/s Ethernet

6Gb/s SAS expansion port

16.

1 Gb/s Ethernet (Wake On LAN)

miniUSB COM port

17.

1 Gb/s Ethernet

D-Sub VGA port

(Res: 1920 x1080@60Hz)

Note:

The management port supports only 100Mbs and 1000Mbs (1Gbs) speeds.

PCI-E card is an optional add-on component!

WARNING

The only time you should remove the controller is to install/ replace the failed

controller. The RAID controller is built of sensitive components and unnecessary

tampering may damage the controller.

Summary of Contents for NVR7312(2U)
















































































































































































































































































































































































Search results

Summary of Contents for NVR7312(2U)

Reviews:

Related manuals for NVR7312(2U)

Brands by name

Popular brands

Surveon NVR7312(2U), User Manual

Search results

Summary of Contents for NVR7312(2U)

Reviews:

Related manuals for NVR7312(2U)

Brands by name

Popular brands