Surveon NVR7312(2U) User Manual Download Page 182

Page: 182 / 367

182

8.5. PTZ Settings

In cameras equipped with any combination of pan, tilt or zoom (PTZ) functionality,

these settings are used to configure the PTZ functions.

8.5.1. PTZ Settings

The PTZ settings deal with the software PTZ control panel. These settings adjust

how much the camera will pan, tilt, zoom, and focus with each control panel input.

Note

: You must be logged into the camera before changing settings or else the

operation will fail.

Right-click the specific camera with the PTZ functionality and click

PTZ

Setup > PTZ

Summary of Contents for NVR7312(2U)
















































































































































































































































































































































































Search results

Summary of Contents for NVR7312(2U)

Reviews:

Related manuals for NVR7312(2U)

Brands by name

Popular brands

Surveon NVR7312(2U), User Manual

Search results

Summary of Contents for NVR7312(2U)

Reviews:

Related manuals for NVR7312(2U)

Brands by name

Popular brands