Supero SUPER 370DDE, User Manual

Page: 106 / 171

5-26
S
UPER 370DDE/370SDA User's Manual
Troubleshooting
Microsoft Millennium
Installing Drivers During Millennium Installation
The following details the installation of the FastTrak100 drivers while
installing Microsoft’s Millennium (with the FastTrak100 controller card
already in place). If you’re installing the FastTrak100 drivers on a system
with Millennium already installed, see “Installing Drivers with Existing
Millennium System.”
1. Install Microsoft Millennium fully.
2. After installation, go the “Start” menu and choose “Settings.”
3. From the “Settings” menu, choose “Control Panel.”
4. In the “Control Panel” window, double-click on the “System” icon.
5. In the “System” window, choose the “Device Manager” tab.
6. In the hierarchical display under “Other Devices” is a listing for “PCI
RAID Controller.” Choose it and then press the “Properties” button.
7. Choose the “Driver” tab in the “Properties” window, choose “Update
Driver,” and then press “Next.”
8. Choose “Search for a better driver than the one your device is using now
(recommended),” then press “Next.”
9. Choose “Specify Location,” and then type “A:\WINME” in the text box.
10. Insert the “FastTrak100 Driver” diskette into the A: drive.
11. Press the “Next” button. A message informing you that Windows
Millennium has found “Windows Millennium Promise FastTrak100
Controller” should appear.
12. Press “Next,” then “Finish,” then “Yes” when asked if you want to
restart your computer. Be sure to remove the diskette from drive A:.
Installing Drivers with Existing Millennium System
The following section details the installation of FastTrak100 drivers on a
system that has Millennium already installed and running. If you’re
installing the Ultra100 drivers on a system during an installation of
Millennium, see “Installing Drivers During Millennium Installation.”